Octava. Specialist in HDMI video distribution          
      Guarantee
Google+_OctavaFacebook_OctavaTwitter_Octava
                 
       
 

HDMI Matrix over Single CAT 6 cable- Video.Audio.Control.Power

 
 

Description:

The HD4xSTPMX CardFrame HDMI Matrix distributes any 4 HDMI Sources to up to 8 Zones. Connect each Zone Receiver via a single Cat6 cable. The Matrix can be configured with 1 to 8 outputs for enhanced system flexibility . The plug-in output cards enable your System Installer to add zones as required with minimum initial investment. Power over Ethernet (PoE) provides power to your Zone Receivers for clean and convenient installations.

The HD4xSTPMX CardFrame HDMI Matrix simplifies HD video connectivity using 1 Cat 6 cable. The HD4xSTPMX is a multi-format matrix switch that extends 1080p,, 3D video and Advanced bitstream multichannel audio formats 200ft on 1 single Cat 6A cable.

The HD4xSTPMX also extends IR, RS-232 controls and PoE power thus simplifying installations while delivering high quality uncompressed 1080P HD video and audio. The CAT 6 outputs and attached Zone Receivers automatically enters Power Save mode when the attached display is turned OFF for optimal power conservation.

Utilizes Power over Ethernet , PoE, to directly power the connected HDSTP-70-RX receiver thus allowing clean and compact installations.

 

  • 4 HDMI inputs.
  • Up to 8 outputs.
  • Configurable and upgradeable. Choose from 1- 8 ouputs. Upgrade to more outputs as needed ( up to 8)
  • 3D, 1080P
  • Distributes HD Video, Audio, IR, RS-232 and power over single Cat6A cables up to 200ft (60m).
  • Non-blocking Matrix – view Any Source on Any Display
  • Power over Ethernet, PoE, provides power to Zone Receiver unit
  • IR Control of the matrix via front panel sensor and from each Receiver location
  • Bi-Directional IR Send IR from display side to source side OR vice versa
  • Wideband IR 20-60 KHz circuitry for maximum IR remote compatibility.
  • RS-232 extension and forwarding for controlling display device.
  • IP Control using Telnet
  • EDID Management plus custom EDID via USB
  • Front Panel Control
  • Ability to save and recall presets– allows users to Store and Quickly recall favorite Input/Output configurations.
  • Field-upgradeable firmware via USB
  • CAT 6 outputs and attached Zone Receivers enter Auto Power Save mode when display turned OFF.

 

Application Diagram  
HDbaseT Matrix HD4xSTPMX banner HDMI Matrix HDbaseT over 1 cable 200ft-HD4xSTPMX application
   
Add To Cart
International (Outside USA)

no longer available

Refer to new PRO DSX 4k UHD Over LAN

  Solution Graphics

Price listed above are for USA shipments.

International orders(outside USA) welcome:Please purchase directly from our approved international distributors. If there is not a distributor listed near you, please order directly above by clicking "add to cart"

Price not include :custom duties and international shipping, VAT/GST (other Gov. Taxes).

 

HDMI Matrix with HDbaseT outputs front view

Choose number of outputs you currently need for your system. Upgrade to more outputs as needed ( up to 8)

HDMI Matrix with HDbaseT outputs back view

 

HD Matrix: Model HD4xSTPMX

Zone Receiver: Model HD70STP-RX

IR receiver cableIR Emitter

IR Receiver and Emitter Cables.(included)

Specification
Model
HD4xSTPMX
HDMI Inputs
4

RJ45 Outputs

8 Maximum. User configured by installing 1 to 8 output cards. Up to 8 Zones

Max link distance

200ft  (60m). CAT6 ( TIA-568-B )cable recommended

Unshielded Cat 5e may be used, but will have shorter link distance.

Digital Audio Outputs

1 (mirrors Zone A Card Frame output)

Video Resolution

1080P (60/50/24) , 720p(60/50), 1080i (60/50)

All current 3D consumer formats Uncompressed high definition (HD) video: 1080p@60Hz@36 bits 1080p@60Hz@48 bits, 3D

Power over Ethernet ( PoE)

Power the Zone Receivers via your CAT 6A cables.

IR Control

IR control of the Matrix, x4 Sources (Routed) plus an AVR from Zone receivers.

Infrared Bandwidth

Wideband IR 20-60 KHz circuitry for maximum IR remote compatibility using Octava supplied IR cables.

RS-232

Control the Matrix using serial commands or 3rd party control software.

Serial Commands can also be routed to the connected Zone receivers via your

CAT6A cables to control your HD Displays.

USB

USB port provided for Firmware updates, customization and for service.

LAN /IP Port

LAN port provided for Firmware updates, and control.

Control

Front Panel buttons, Serial Port, LAN Port, or IR Remote Control.

EDID Management

5 common EDID selections provided. Customized EDID also available and can be downloaded to matrix using USB or LAN port.

Favorites Recall

Up to 4 user configured Input/output Front Panel Pre-sets.

Dimensions

Matrix (2RU): 18.9 x 10.94 x 3.47 in - 48.0 x 27.8 x 8.82cm (WxDxH)

Receiver : 3.19 x 4.53 x  1.13 in - 8.1 x 11.5 x 2.9cm (WxDxH)

19” Rack Mounts

Integrated. Removable.

Power Supply

1 x 9VDC  (Matrix) and 1 x 48VDC (Zone Receivers) included

Contact us by email at info@Octavainc.com

 

 
Octava Inc.
7078 Peachtree Industrial Blvd. Suite 300
Phone:770-825-0388
Norcross, Ga. 30071

Copyright © 2014  Octava Inc. All rights reserved.

No part of this web page shall be reproduced without permission.

All prices and specifications are subject to change without notice. All trademarks are the sole property of their respective companies.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing L.L.C